Skid-mounted Drilling Rig
Skid-mounted Drilling Rig
您现在的位置：首页 >> products >> Drilling Equipments >> Skid-mounted Drilling Rig
| ZJ40/2250J Rig |
| Author：管理中心
Source： Release date：2015-3-18 Clicks：1787 |
|
|
|
ZJ40/2250J rig is block substructure with K type mast, adopts 3 sets of PZ12V190B diesel engines to drive all devices. Main Drawworks and compounding transmission set are placed on 1m high rear substructure, and the rotary table is placed on 6m high drill floor. Belt compounding transmission device drives Drawworks by chain, drive to rotary table through dynamic bevel gear box and cardan shaft. Belt compounding transmission device drives mud pump by belt. The rig is the best alternative product of Daqing 130 rig.
|
|
|
1. Substructure adopts the modular mode, and blocks connect with each other by pins, which can realize to move quickly.
2. Mast is front open-face, “K” type mast. The five sections of mast is tower-type integral structure, can install with the crown block to transport together. The supporting leg is located at base of substructure. stability is good, It is raised and laid down by Drawworks power as a whole. 3. Transfer power though the bevel angle gearbox and the cardan shaft, and the rotary table power is from the cathead winchs chain box and cardan shaft, the structure is simple and easy to install. Drawworks is divided, the main of which is placed under drill floor, it adopts sealing structure, chain is force-feed lubrication, pneumatic tyre gear change and drum grooving.
|
|
|
Technical diameter
|
|
Nominal drilling depth (114mmDP)
|
2500～4000m
|
|
Open diameter of rotary table
|
φ700mm (27.5” )
|
|
(127mmDP)
|
2000～3200m
|
Qty.× power of diesel
engine
|
3×800kW
|
|
Max.hook load
|
2250kN
|
Shift of Drawworks
|
4+2R
|
|
Traveling system
|
5×6
|
Height of substructure
|
6m
|
|
Dia of Drill line
|
φ32mm
|
Mast type and height
|
Ktype, 43m
|
|
Qty.× power of mud pump
|
2×1300hp
|
Drawworks power
|
735kW（1000hp）
|
|
Drive type
|
belt compound
|
Mud high pressure
manifold
|
Φ102mm（dia）×35MPa
|
|
Rotary table gears
|
2 shaft stepless speed
regulation
|
Effective capacity
of mud tank of solid control system
|
≥180m3
|
|
|
|
 
|
|
|
International: 0086-393-4751711 sales@zytpetro.com
Domestic: 0086-393-4752837 shchb@zytpetro.com
Human resources: 0086-393-4752378 rlzyb@zytpetro.com
Copyright:ZYT Petroleum Equipment Co., Ltd. ICP prepared by: 09040838
