| Rear-mounted Swabbing Truck |
| Author：管理中心
Source： Release date：2014-7-31 Clicks：1409 |
|
|
|
The basic structure of the whole truck is truck-mounted moving type. The framework is installed on the frame, the front support frame is installed on the front of the framework, full power P.T.O, operating room. lifting oil cylinder, drawworks, angle gear box is installed on the middle of the framework, rear support frame, hydraulic outrigger cylinder, hydraulic oil tank etc. are installed on the rear of the framework. Mast is the truss structure, the rear part is connected with the rear support frame by pin, the middle part is connected with the lifting cylinder actively. The drawworks power comes from the engine of the chassis, it is transmitted to the drawworks passing through full power P.T.O, transmission shaft, angle gear box, main chain, then drives the drawworks to finish the positive and reverse rotation. The hydraulic oil in the pipeline is supplied pressure by setting side P.T.O and driving the gear pump rotate.
|
|
|
The equipment has the following features: high operation speed, large lifting tonnage, reasonable distribution ratio of the transmission coefficient, long service life, high safety factor for mast, safe and reliable, reliable control etc, it is one of powerful production increasing equipments in oil field.
|
|
|
Max.
lifting capacity (in the min diameter part of the drum)
|
120
|
|
Max.
working depth
|
1850，2350，2550，2850
|
|
Mast
structure
|
Integral type,
separate type, sectional type
|
|
|
|
 
|
|
|
